Product Description

Introduction 

• Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
• While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
• We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

Application

• Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
• For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
• Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
• This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

Feature

• High absorption capacity of radial misaligment
• They do not produce kinematic errors in transmission
• Elimination of loads on shaft
• Mechanical protection against excessive torque
• Replaceable disc

1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

FAQ:

1. When can I get the quotation ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality ? 
After price confirmed,sample order is available to check our quality.

3. What is your main products ? 
Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

4. Could you get a better price on your products ?
Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

5. What is the strength of your company ?
We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

Welcome to inquiry US! 

What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

What are the Maintenance Requirements for Oldham Couplings to Ensure Their Longevity?

Maintaining Oldham couplings is essential to ensure their longevity and optimal performance. Proper maintenance practices can prevent premature wear and damage, reducing the risk of unexpected failures and downtime. Here are some maintenance requirements to consider for Oldham couplings:

• Regular Inspection: Perform regular visual inspections of the coupling to check for signs of wear, misalignment, or damage. Look for cracks, corrosion, or any unusual behavior during operation.
• Lubrication: Oldham couplings may require periodic lubrication to reduce friction between moving parts and prevent excessive wear. Check the manufacturer’s guidelines for the appropriate lubrication schedule and type of lubricant to use.
• Alignment: Proper alignment is crucial for Oldham couplings to function correctly. Ensure that the shafts and hubs are correctly aligned to avoid additional stress on the coupling components.
• Torque Check: Periodically check the coupling’s torque to verify that it is within the recommended operating range. Over-torqueing or under-torqueing can lead to coupling failure.
• Environmental Protection: In harsh environments or applications exposed to contaminants, consider using protective covers or enclosures to shield the coupling from debris, dirt, and moisture.
• Replacement of Worn Parts: If any component of the Oldham coupling shows signs of wear or damage, promptly replace it with a new one from the manufacturer.
• Proper Handling: During installation or maintenance, handle the coupling components with care to avoid any accidental damage.

It is crucial to follow the manufacturer’s maintenance guidelines and recommendations specific to the Oldham coupling model being used. Proper maintenance practices will not only extend the coupling’s lifespan but also contribute to the overall reliability and efficiency of the mechanical system it is part of.

What is an Oldham Coupling and How Does It Function in Mechanical Systems?

An Oldham coupling is a type of flexible coupling used in mechanical systems to transmit torque between two shafts that are misaligned. It consists of three main components: two hubs or discs and a middle block. The two hubs are connected to the respective shafts, and the middle block sits in between them.

The key feature of the Oldham coupling is the middle block, which has slots on its opposite faces and is connected to the hubs using pins or keys. The slots in the middle block are oriented perpendicular to each other, allowing the middle block to move in a plane perpendicular to the axis of the shafts.

When torque is applied to one shaft, it is transmitted to the middle block of the coupling. Due to the slots, the middle block can slide laterally as the shafts rotate, accommodating both angular and axial misalignments between the shafts. This sliding action helps to reduce the reaction forces and wear that would otherwise occur in rigid couplings when misalignment is present.

Oldham couplings are known for their ability to provide constant velocity transmission even when misalignment exists. They do not have any backlash, which means there is minimal play between the coupling components during rotation. This feature makes them suitable for precision applications where accurate torque transmission and positioning are required.

One of the main advantages of the Oldham coupling is that it effectively isolates the connected shafts from each other, which can help in reducing vibrations and noise. Additionally, it can compensate for parallel misalignment between the shafts, making it ideal for applications where parallel shafts need to be connected while allowing some degree of misalignment.

Oldham couplings are commonly used in various industrial machinery and automation systems, including CNC machines, robotics, printing presses, and conveyor systems. They are particularly useful in applications where precise torque transmission, misalignment compensation, and low maintenance are essential.

editor by CX 2023-10-07