Moreover, all our production procedures are in compliance with ISO9002 requirements. We have exported our products to Korea, Turkey, Bulgaria, Romania, Russia, Italy, Norway, the Usa, Canada, etc. Hangzhou EPG Co.,Ltd. , was founded in November, 1997. With its five wholly owned subsidiaries. Centrifugal Horizontal Ultra Chrome alloy AH EPT EPT
Introduction:
1. HS series slurry pump is created for the continuous pumping of substantial abrasive, EPT slurries with nominal upkeep needs. The sporting areas are made of extremely chrome or and rubber. It will sustain substantial efficiency over the dress in life of its parts.
2. The metallic moist elements and rubber types can be interchangeable for handling various liquids or slurries.
3. HS slurry pumps are available in measurements ranging from 1 inch to 18 inch discharge and attribute high efficiency performance able of circulation rates from ten.eight to 5400 m sup3/h and heads up to 125 meters for high head types.
Characteristics:
one. Cylindrical composition of bearing assembly: hassle-free to change the place amongst impeller and JCEP liner
and can beremoved fully
2. Interchangeable anti-abrasive soaked components made of higher-chrome alloys
three. Casing halves of ductile iron with external reinforcing ribs give large working stress abilities
and an additional evaluate of safety.
four. The discharge branch can be oriEPTTd to any eigEPTT positions at the interval of 45 levels
five. Different EPT sorts: DC(direct link), V-belt EPT, EPT box EPTT, EPT couplings, VFD,
SCR control, and many others
six. The shaft seal uses the EPTT seal, expeller seal and mechanical seal
Normal Software:
| #8226 Mineral processing | #8226 EPT | #8226 EPTT Washery | #8226 Cyclone feeds |
| #8226 Bentonite | #8226 EPTT slurry | #8226 EPTEPTTng | #8226 Mill grinding |
| #8226 Ash hXiHu (West EPT) Dis.Hu (West EPT) Dis. | #8226 Tunnel | #8226 Waste sludge | #8226 Coarse sand |
| #8226 Lime mud | #8226 Phosphoric acid | #8226 EPTT | #8226 EPTT |
| #8226 Alumina JCEP | #8226 EPTT Plant | #8226 Potash FerEPTTzer Plant | #8226 Other EPTT |
| #8226 Iron ore sand | #8226 JCEP Concentration | #8226 EPT EPT | #8226Molybdenum |
| Design | Max EPTT (Kw) |
Inlet amp Outlet dimensions (inch) | EPT for Use Areas | Flow Fee (Q) | EPT (H) meter |
Speed (RPM) |
EPTTeller Dia. (mm) |
|
| m sup3/hr | l/s | |||||||
| 25HS-B | fifteen | one.five/one | M | 12.6~28.8 | 3.5~eight | 6~sixty eight | 1200~3800 | 152 |
| R | ten.eight~25.two | three~seven | seven~fifty two | 1400~3400 | 152 | |||
| 40HS-B | 15 | 2/one.5 | M | 32.4~seventy two | nine~20 | six~fifty eight | 1200~3200 | 184 |
| R | 25.two~54 | 7~15 | 5.five~41 | one thousand~2600 | 178 | |||
| 50HS-C | thirty | 3/2 | M | 39.six~86.four | eleven~24 | 12~64 | 1300~2700 | 214 |
| R | 36~75.six | ten~21 | thirteen~46 | 1300~2300 | 213 | |||
| 75HS-C | thirty | 4/three | M | 86.four~198 | 24~55 | 9~fifty two | 1000~2200 | 245 |
| R | seventy nine.two~180 | 22~50 | five~34.five | 800~1800 | 245 | |||
| 100HS-D | 60 | 6/4 | M | 162~360 | forty~a hundred | twelve~56 | 800~1550 | 365 |
| R | one hundred forty four~324 | 40~90 | twelve~45 | 800~1350 | 365 | |||
| 150HS-E | a hundred and twenty | eight/6 | M | 360~828 | 100~230 | ten~61 | 500~1140 | 510 |
| R | 324~720 | ninety~two hundred | 7~49 | four hundred~1000 | 510 | |||
| 200MS-E | 120 | ten/eight | M | 666~1440 | 185~four hundred | 14~60 | 600~1100 | 549 |
| 200HS-ST | 560 | ten/eight | M | 612~1368 | a hundred and seventy~380 | eleven~61 | 400~850 | 686 |
| R | 540~1188 | a hundred and fifty~330 | 12~fifty | four hundred~750 | 686 | |||
| 250HS-ST | 560 | twelve/10 | M | 936~1980 | 260~550 | seven~sixty eight | 300~800 | 762 |
| R | 720~1620 | two hundred~450 | seven~forty five | three hundred~650 | 762 | |||
| 300HS-TU | 560 | 14/twelve | M | 1260~2772 | 350~770 | 13~sixty three | 300~600 | 965 |
| R | 1152~2520 | 320~seven hundred | 13~forty four | three hundred~500 | 965 | |||
| 350HS-TU | 1200 | 16/14 | M | 1368~3060 | 380~850 | eleven~63 | 250~550 | 1067 |
| 450HS-TU | 1200 | twenty/18 | M | 2520~5400 | 700~1500 | 13~fifty seven | 200~four hundred | 1370 |
| 25HHS-C | thirty | one.five/one | M | sixteen.two~34.2 | 4.5~9.five | twenty five~ninety two | 1400~2200 | 330 |
| 50HHS-D | 60 | 3/2 | M | 68.4~136.8 | 19~38 | 25~87 | 850~1400 | 457 |
| 75HHS-E | one hundred twenty | four/three | M | 126~252 | 35~70 | 12~ninety seven | 600~1400 | 508 |
| 100HHS-E | one hundred twenty | 6/four | M | 324~720 | ninety~two hundred | thirty~118 | 600~1000 | 711 |
| 150HHS-S | 560 | eight/six | M | 468-1008 | 130~280 | 20~ninety four | 500~one thousand | 711 |
For the substance of putting on components,
quotM quot = metallic, ultra chromium alloy quotR quot = anti-abrasive rubber
Contact
Welcome to get in touch with us any time for particulars.
Your inquiry will get our prompt interest and response !
