Product Description

Introduction 

• Oldham couplings are a 3 piece design comprised of 2 aluminum hubs press fit CHINAMFG a center disk. Torque transmission is accomplished by mating the slots on the center disk to the drive tenons on the hubs. During operation the center disk slides on the tenons of each hub (which are orientated 90 apart) to transmit torque.
• While the couplings accommodate a small amount of angular and axial misalignment, they are especially useful in applications with parallel misalignment.
• We offers oldham couplings in set screw or clamp styles with bores ranging from 4mm to 35mm. Inch and metric hubs (set screw, clamp style, keyed, or keyless) are interchangeable and can be combined into a single coupling as long as they have the same outside diameter. Oldham coupling hubs are standard in black anodized aluminum for improved lubricity, increased life, and low inertia. Hubs are also available in stainless steel CHINAMFG request for increased corrosion resistance.

Application

• Ideal for many light duty industrial and motion control applications, oldham couplings have the ability to protect more expensive machinery components.
• For example the oldham coupling acts as a torque limiter during overload. When the disk fails, it breaks cleanly and does not allow any transmission of power.
• Oldham couplings also have the advantage of electrical isolation due to the non-conductive nature of the center disk.
• This prevents electrical currents from being passed to delicate instruments which can cause inaccurate data readings or damage.

Feature

• High absorption capacity of radial misaligment
• They do not produce kinematic errors in transmission
• Elimination of loads on shaft
• Mechanical protection against excessive torque
• Replaceable disc

1. We have first-class testing equipment to detect linear guide various data parameters and control the quality of the linear guide.Whenever linear guides must first detected whether the quality is qualified and the unqualified linear guide will be eliminated directly.So we can get the trust of a large customer, and supply them for several years.

2. We have our own R & D capabilities, to help customers solve the problem of non-standard linear guides.We can also according to customer requirements change their own mark.

3. Price, our manufacture ensure that our prices across China are quite competitive.It is better for you to compare prices and quality among suppliers.But everyone knows you can not buy the highest quality products with the lowest price,but our product is the best quailty if you use equal price.

FAQ:

1. When can I get the quotation ?
We usually quote within 24 hours after we get your inquiry. If you are very urgent to get the price,please call us or tell us in your email so that we will regard your inquiry priority.

2. How can I get a sample to check your quality ? 
After price confirmed,sample order is available to check our quality.

3. What is your main products ? 
Linear motion systems,like lead screws, flexible coupling,Miniature linear guide rails,ball screws,linear rod shaft,ceramic bearings …etc. But also CNC machining centers and CNC machinable tooling boards.

4. Could you get a better price on your products ?
Yes,you can.We will give the best price on all of the products you need,which can help you to compete other companies in your markets.

5. What is the strength of your company ?
We have a engineer team,who have well experienced on product’s and machine designs.We can help you to solve the problems you meet. 

Welcome to inquiry US! 

What are the Potential Limitations or Drawbacks of Using an Oldham Coupling?

While Oldham couplings offer numerous advantages, they also have some limitations and drawbacks that should be considered when selecting a coupling for a specific application:

1. Limited Misalignment Capacity: Oldham couplings can only accommodate small amounts of angular and axial misalignment between the shafts. They are not suitable for applications with high levels of misalignment as excessive misalignment can lead to premature wear and failure of the center disc.

2. Speed Limitations: Oldham couplings are generally not recommended for high-speed applications. The flexible center disc has a maximum speed limit, and exceeding this limit can cause the disc to fatigue and fail over time.

3. Temperature Sensitivity: The performance of Oldham couplings can be affected by temperature fluctuations. Extreme temperatures can impact the flexibility and integrity of the center disc material, leading to reduced coupling performance.

4. Backlash in High-Precision Systems: While Oldham couplings minimize backlash compared to some other couplings, they may still have some inherent clearance between the hubs and the center disc, leading to a slight amount of backlash. In ultra-high-precision systems, this slight backlash may be a concern.

5. Material Compatibility: The material used for the center disc must be chosen carefully to ensure compatibility with the specific application’s environment and the media being conveyed. Some aggressive chemicals or harsh environments may degrade the material over time.

6. Maintenance: Oldham couplings require periodic inspection and maintenance to ensure proper functioning. The center disc may wear out over time and need replacement, especially in applications with high torque or frequent start-stop cycles.

Despite these limitations, Oldham couplings remain a popular choice in many applications due to their vibration reduction, backlash minimization, and moderate misalignment compensation capabilities. However, it is essential to carefully assess the specific requirements of the application and consider the potential drawbacks before selecting an Oldham coupling.

Can an Oldham Coupling be Used in Precision Motion Control Applications?

Yes, an Oldham coupling can be used in precision motion control applications. Oldham couplings are known for their ability to provide constant velocity transmission while accommodating misalignment. These couplings offer low backlash and minimal hysteresis, making them suitable for precision motion control systems.

Precision motion control applications require accurate and repeatable motion, which can be achieved by using an Oldham coupling. The coupling’s design allows it to handle angular misalignment without introducing significant axial or radial forces. This feature helps maintain the accuracy and integrity of the motion control system.

Oldham couplings are often used in applications such as robotics, CNC machines, optical equipment, and other systems where precise positioning and smooth motion are essential. Their ability to reduce vibration and minimize backlash is particularly beneficial in these applications, as it enhances the system’s overall performance and accuracy.

When selecting an Oldham coupling for precision motion control, it is essential to consider factors such as the required torque capacity, speed, and shaft sizes. Additionally, regular maintenance and proper alignment are crucial to ensure the coupling’s optimal performance in precision applications.

Advantages of Using an Oldham Coupling Compared to Other Types of Couplings

An Oldham coupling offers several advantages over other types of couplings, making it a preferred choice in certain applications:

• Misalignment Compensation: The Oldham coupling can handle both angular and axial misalignments between shafts. It allows for up to a few degrees of misalignment while transmitting torque smoothly, reducing the risk of premature wear and failure caused by misalignment.
• No Backlash: Unlike some other flexible couplings, the Oldham coupling has minimal backlash. This means there is little to no play or clearance between the coupling components during rotation, ensuring precise torque transmission and positioning in high-precision applications.
• Vibration and Noise Damping: The sliding action of the middle block in the coupling helps to isolate the shafts from each other, reducing vibrations and noise during operation. This feature is beneficial in applications where vibration dampening is critical to equipment performance and longevity.
• High Torque Transmission: Oldham couplings can handle relatively high torque transmission, making them suitable for applications with moderate to high torque requirements.
• Low Maintenance: Due to its design, the Oldham coupling experiences minimal wear during operation, leading to lower maintenance requirements and longer service life.
• Easy Installation: Oldham couplings are relatively easy to install and remove, simplifying maintenance and replacement procedures.
• Electrically Insulating: Some Oldham couplings are available with non-conductive materials, providing electrical isolation between shafts, which is essential in certain applications.
• Cost-Effective: Compared to other high-performance couplings, Oldham couplings are often more cost-effective, providing reliable performance without breaking the budget.

Overall, the Oldham coupling is an excellent choice in applications where misalignment compensation, precision torque transmission, vibration dampening, and low maintenance are critical factors for successful operation. Its unique design and features make it suitable for various industrial and automation systems, contributing to smoother and more efficient mechanical power transmission.

editor by CX 2023-11-07