Product Description

GH Oldham type coupling cross sliding set screw coupling

Description of GH Oldham type coupling cross sliding set screw coupling
>The colloid material is imported PA66, which has good wear resistance, corrosion resistance and electrical insulation
>Sliding design can compensate radial and angular deviation more effectively
>Detachable design, easy to install
>Fastening method of clamping screw

Dimensions of GH Oldham type coupling cross sliding set screw coupling

  

model parameter	common bore diameter d1,d2	ΦD	L	LF	LP	F	M	tightening screw torque (N.M)
GH-16X18	4,5,6,6.35,7,8	16	18	7.1	11.6	3.55	M3	0.7
GH-20X25	5,6,6.35,7,8,9,9.525	20	25	9.1	12.7	4.55	M4	1.7
GH-25X28	5,6,6.35,8,9,9.525,10,11,12,14	25	28	11.7	16.65	5.58	M4	1.7
GH-32×33	5,6,8,9,9.525,10,11,12,12.7,14,15,16	32	33	14	19.5	7	M4	1.7
GH-40X35	8,9,9.525,10,11,12,12.7,14,14,16,17,18,19,20	40	35	15.5	18.4	7.75	M4	1.7
GH-45X46	8,9,9.525,10,11,12.7,14,15,16,17,18,19,20,22	45	46	21.5	18.4	9	M5	4
GH-50X38	10,12,12.7,14,15,16,17,18,19,20,22,24,25	50	38	16.5	15	8.25	M5	4
GH-55X57	10,12,12.7,14,15,16,17,18,19,20,22,24,25,28,30,32	55	57	27	17.5	10.5	M5	4
GH-63X47	14,15,16,17,18,19,20,22,24,25,28,30,32	63	47	21	17.5	10.5	M6	8.4
GH-70X77	16,17,18,19,20,22,24,25,28,30,32,38,40	70	77	36.5	25	13.5	M8	10.5

 

model parameter	Rated torque (N.M)*	allowable eccentricity (mm)*	allowable deflection angle (°)*	allowable axial deviation (mm)*	maximum speed rpm	static torsional stiffness (N.M/rad)	moment of inertia (Kg.M2)	Material of shaft sleeve	Material of shrapnel	surface treatment	weight (g)
GH-16X18	0.7	0.8	3	±0.2	9000	30	3.3×10-7	High strength aluminum alloy	P A 6 6	Anodizing treatment	6
GH-20X25	1.2	1.2	3	±0.2	7000	58	1.1×10-6				18
GH-25X28	2	1.6	3	±0.2	6000	130	3.1×10-6				25
GH-32×33	4.5	2	3	±0.2	4800	270	9.6×10-6				44
GH-40X35	9	2.4	3	±0.2	3600	520	2.3×10-5				81
GH-45X46	12	2.8	3	±0.2	3500	560	3.8×10-5				136
GH-50X38	19	2.6	3	±0.2	3000	800	1.8×10-4				142
GH-55X57	22	3.3	3	±0.2	2800	795	8.0×10-4				255
GH-63X47	19	3	3	±0.2	2500	1200	8.3×10-4				320
GH-70X77	56	3.8	3	±0.2	2500	1260	3.9×10-4				445

 

How to Identify Signs of Wear or Damage in an Oldham Coupling?

Regular inspection of Oldham couplings is essential to ensure their proper functioning and prevent unexpected failures. Here are some signs of wear or damage to look for during the inspection:

1. Visible Cracks or Deformation: Check the center disc and the hubs for any visible cracks, tears, or deformation. These can be indicators of excessive stress or misalignment.

2. Abnormal Vibrations: Excessive vibrations during operation may suggest that the coupling is not functioning correctly. It could be due to wear in the center disc or improper installation.

3. Unusual Noise: Grinding, clicking, or banging noises during equipment operation may indicate that the Oldham coupling is experiencing excessive backlash or misalignment.

4. Increased Backlash: If there is noticeable play or free movement between the coupling components, it may be a sign of wear in the center disc or worn hubs.

5. Reduced Performance: A decrease in the performance of the machinery or unexpected issues with power transmission could be indicative of coupling problems.

6. Abnormal Heating: If the coupling becomes unusually hot during operation, it may suggest friction or misalignment issues.

7. Excessive Wear on Center Disc: Inspect the center disc for signs of wear, such as grooves, uneven surfaces, or material loss. This may occur over time due to the repeated flexing of the disc.

8. Lubrication Issues: Improper or inadequate lubrication can lead to increased friction and wear in the coupling components.

If any of these signs are observed during the inspection, it is essential to address the issue promptly. Depending on the severity of the wear or damage, the Oldham coupling may require replacement or repair. Regular maintenance and proper lubrication can help extend the life of the coupling and prevent unexpected failures, ensuring smooth and reliable operation in the machinery or equipment.

How to Calculate the Required Size and Specifications for an Oldham Coupling

Calculating the required size and specifications for an Oldham coupling involves considering several key factors. Here’s a step-by-step guide to help you with the calculations:

1. Identify the Torque Requirements: Determine the maximum torque that the coupling needs to transmit between the two shafts. This can be done by analyzing the torque demands of the application and considering safety factors.
2. Select the Coupling Material: Based on the operating conditions and the type of machinery, choose a suitable material for the Oldham coupling. Common materials include aluminum, stainless steel, and acetal.
3. Calculate the Bore Diameter: Measure the diameters of the shafts that the coupling will connect. The bore diameter of the coupling should match the shaft diameters for a proper fit.
4. Determine the Coupling Size: The coupling’s size is typically specified by its outside diameter and length. Ensure that the selected coupling size fits within the available space in the mechanical system.
5. Consider Misalignment Compensation: Oldham couplings can accommodate angular misalignment. However, it’s essential to check the coupling’s rated misalignment capability to ensure it meets the application’s requirements.
6. Check Operating Speed: Verify that the selected coupling can handle the rotational speed (RPM) of the application without exceeding its critical speed.
7. Factor in Environmental Conditions: If the coupling will be exposed to harsh environmental conditions or corrosive substances, choose a material that can withstand these conditions.

Once you have gathered all the necessary information and made the calculations, you can select the appropriate Oldham coupling that meets the requirements of your specific application. It’s important to consult with coupling manufacturers or engineering experts to ensure the coupling’s compatibility and reliability in your system.

How an Oldham Coupling Accommodates Misalignment Between Shafts

An Oldham coupling accommodates misalignment between shafts through its unique design, which consists of three main components:

1. Two Hubs: Each hub is attached to the shaft of the connected equipment. The hubs have a series of slots around their circumference.
2. Middle Block: The middle block fits between the two hubs and has perpendicular slots on its inner diameter. It connects the two hubs while allowing relative movement between them.

When the shafts experience angular or axial misalignment, the middle block slides within the slots of both hubs. The perpendicular slots on the middle block engage with the slots on the hubs, creating a parallelogram linkage.

This parallelogram linkage allows the Oldham coupling to compensate for angular misalignment by enabling the hubs to rotate independently about their own axes. The sliding action of the middle block accommodates axial misalignment by allowing the hubs to move slightly closer or farther apart.

The use of sliding contact instead of direct physical contact between the hubs minimizes friction, backlash, and wear, making the Oldham coupling an efficient and reliable method for transmitting torque while accommodating misalignment.

Overall, the Oldham coupling’s ability to handle both angular and axial misalignment ensures smooth and precise torque transmission between shafts, reducing stress on connected equipment and extending the lifespan of mechanical components.

editor by CX 2023-12-12