Zykm1428 sales High Speed Printer Sloter Die Cut Machine with ce certificate top quality low price

Product Description

I. CZPT Feature:
1. The total machine adapt PLC controlling print unit and slot phase adjustment, easy to operate and reliable.
2. Whole machine frame and important part are being aging treatment, tempering eliminate the stress of metallic; all of them come from high precision processing center, CNC grinding machining process. All the rollers are high quality steel, high precision Computer dynamic balancing correction of hard chromium plating, surface grinding.
3. The transmission gear adopt 40 CrMin Ti high quality alloy steel which is grinded, and after the heat treatment ,it can up to six precision, Its surface with rockwell hardness HRC58-62, make color more accuracy.
4. Each unit of the machine with electric separation, and pneumatic locking, pneumatic total lock, to ensure the stability of the unit, and continue ring for caution when machine be separated, to ensure the safety of operating person.
5. The machine with emergency stop switch at CZPT , middle and back section.
6. CZPT y unit of machine with emergency stop switch, so the machine can be stopped between the unit, it can ensure the workers safe (remark: every unit moving is drag by feeder unit)
7. All the machine electric parts application keyless connecting ring, eliminating the gap generated by the traditional connection, keep the CZPT -term precision of printing chromatic.
8. The machine lubrication system uses a spray automatic lubrication, and with the device impermeable to oil spills institutions awarded.
Main parameter

type unit ZYKM1428
Plate roller dia mm ¢480
Plate roller length mm 2800
Inner width of machine mm 3100
max speed Ps/min 200
economic speed Ps/min 160
max printing size Mm   1400×2900  
  min feeding paper size   Mm   320×750  
  board thickness   Mm   2/3-10mm  
  machine frame thickness   Mm   6mm  
  topping precision   Mm   ≤±:0.55  
  main motor CZPT   KW   37  

feeder Unit

1) The master control panel by the control buttons and touch screen control operation, convenient and reliable.
2) CZPT edge feed (with counter). Serve absorb feed paper , protect the corrugated cardboard not press .
3) set for counting of paper, showing the production number.
4) The location of left and right bezel control of mechanical CZPT by the ruler display moving distance.
5) The CZPT bezel to manually adjust the gap.
6) 15KW wind turbine, suction feeding, the electric inverter to adjust the air volume, according to board bending different, so air flow adjustments to ensure smooth paper.
7) The dust removal device and fan brush the surface clean cardboard scraps of paper.
11) sending paper up roll diameter ф149 mm, thick-walled seamless steel pipe, wrapped in plastic wear phase, that is to maintain flexibility and ensure that the surface wear and reduce the squash into the board.
12)front feed under the roller diameter ф159 mm, back feed under diameter ф149 m, quenched and tempered seamless steel grinding the surface of hard chromium plated embossed and treatment. Back feed up roller diameter ф100 mm.
13) The transmission uses two roller drive Oldham CZPT , reducing wear and tear to make the drive more stable.
14) the use of electric sub-machine fit, with a continuous alarm warning lights the move to ensure the safety of operations.
15) shaft with electromagnetic friction clutch, to prevent malfunction or overload protection of the motor will not burn.
16) feeder, printing department, the Department of cutting electric automatic zero.
17) CZPT chain of devices.

the printer unit

  • , the print roller
    1) The print version of roller with thick outer ф468mm (including plate thickness will be ф480mm)
    2) CZPT of high quality thick-walled seamless steel roll, surface conditioning, grinding, hard chromium plating.  balance correction, smooth operation.
    3) hanging tube axis, side lock, so hanging on the bit accurate, convenient and CZPT .
    4) full-groove peg board for hanging bar 10mm.
    5) handling print, the foot switch is convenient and flexible electric control reversing.
    2,  the embossing roller
    1) embossing roller diameter ф188mm.
    2) thick-walled seamless steel pipe, surface grinding, hard chromium plating.
    3) balance correction, smooth operation.
    4) Adjust the gap taken roller to manually adjust the structure, adjust the range of 0-11mm
    3, the transfer ink roller

1). The ceramic anilox roller is steel pipe cover with ceramic,with laser cutting,hardness more strong,and more high precission,after balance treatment.usually chose 250-300 lpi.
2) thick-walled seamless steel surface after grinding the surface of ground, pressed textured, hard chrome plating.
3) the same network, even on the ink, printing plates and rubber roller to extend service life.
4) pneumatic feeding system with automatic lifting device (network printing and print exposure roll down, stop printing, anilox roller and plate separation increased).
5) The roller gap structure manually adjust the range of 0-11mm.
4, uniform ink rubber rollers
1) uniform ink rubber roller diameter ф208.28 mm.
2) CZPT quality seamless steel pipe wrapped durable, corrosion resistant, wear-resistant rubber.
3) special high rubber roller grinding, diameter 1.6-1.8 mm, transfer ink effect.
4) rubber roller gap adjustment lock structure by hand, adjust the range of 0-11 mm.
5, Phase adjustment
1) The planetary gear structure.
2) printing phase digitally controlled by computer and electric adjustment of 360 ° (run, stop can be adjusted.) the accuracy is 0.15mm.
3) print roller bits used to adjust the frequency control. CZPT and the adjusted version of CZPT , high precision tune version.
4) the use of electric mechanical horizontal adjustment phase, the control of ± 5 mm.
5) The whole auto-zero in each group, the accuracy is0.5mm, and then automatically adjusts the phase, try one, and then enter the number of fine-tuning, greatly reducing the waste of cardboard
6, ink loop structure
1) pneumatic diaphragm pump for ink stability, operation and maintenance simple.  
2) The ink filter, filter impurities.
7,  the printing phase fixtures
1) CZPT ctromagnetic clutch brake type brake mechanism, when the unit adjusting the phase separation, the brake mechanism limits gears to keep the original tooth position of fixed points.
2) The impression of CZPT transmission roller type transmission using cross slide to reduce wear and tear transmission more stable
 slotter unit

  1. the slotter knife thickness 7mm, manfactured by high alloy , tooth profile cutting sharp , the abration resistance high
  2. the slotter knife phasing crganization , the overtone structure , the frequency changer controls the brake , static 360 degree adjustment . Adjusted by electric control knife axis, vertical and cases of high dimension .
  3. the slotter knife apron derailing uses the electrically operated control, the adjustment is quick and accurated.
  4. regards the user to need to be possible to match the punch insiaiment
  5. slotter deepartment canada supposes the prccop pression to roll around , sharpens the cardboard resistand to compression ability
  6. the line ball cut the angle trun place addition compressing wheel disk , guaranteed the mouth paper box sticks the place to compress

die cut unit


  1. die cut unit roller adopt high quality steel , plated with rigid chrome ., high precision dynamc and static balance increase running stable
  2. mould roller and rubber roller can auto separate by cylinder eccentric device when the machine do not die cut . this can lighten machine load and increase rubber roller and die knife lift
  3. matching with feeder system . it with auto up and down device , the rubber roller will down when feeder paper . the rubber roller will up when stop feeder paper . to make sure every paper die cut correctly
  4. the mechanical transmission rubber roller move 58mm in left and right side . it also with wear and tear regular could increase the life or rubber roller.
  5. die cut phase adopt PLC touch screen . 360 degree adjust electric number
  6. machine with rubber amend device . the rubber roller can be used after many times amend .
  7. free die mould slotting unit , no need to make the die mould when making normal box . saving cost and improved efficiency

Stacker unit

1) The paper can then manually adjust automatically.
2) splicing speed and feed speed is synchronization, then the paper speed can    be adjusted independently
3) The stack height of 1700 mm
4) bed units lifting strength chain drive.
5) The splicing platform equipped with anti-fall device to ensure operator safety.
6) take action paper hanging pressure plates stacked in cardboard to a certain height, then lift up out of cardboard board automatically.
7) plane wrinkle belt, to prevent the cardboard down.
8) received a separate paper to adjust the belt tension arm, without the belt length limit.